Categories

Hot Products

News

Maintenance And Attention Of Pneumatic Yellow Oil Pump
May 03, 2018

Abstract: in order to ensure the normal operation and prolong the service life of the butter pump, we make the following tips on how to use the equipment correctly.

With the increase of the status of lubricating oil in the machinery industry, pneumatic grease pump has received extensive attention and application. In the daily use process, we often find that due to improper operation, the effect of oil injection is not ideal in order to ensure the normal and orderly operation of the butter pump.

1, the compressed air should be filtered to prevent dirt from entering the air pump and wear the air distribution slider and cylinder parts. It is strictly forbidden to use flammable gas as a power. The use of compressed air should not exceed 0.8Mpa, to avoid overload, and affect the life of the equipment itself and the high pressure tube.

2, high pressure rubber tubes, in the process of use do not allow strong bending and ground drag friction, heavy weight rolling, which will affect the life of the oil hose.

3, when the yellow oil pump is resting, it should unload the fast change joint of the air, and buckle the injection gun trigger to reduce the oil pressure in the equipment, so as to avoid the long pressure of the high pressure rubber hose.

4, the air pump part needs to be regularly lubricated. In the process of assembly and repair, attention must be paid to the accuracy of the folded parts, not to touch the wool or roll it down.

  • QR CODE
  • facebook